Overview | Features | Description | Advanced Portable Packages | Optional Devices | Model | Devices Supported | Publicastions | Accessories | Supplies | Trademarks | | | The IBM 9401 is an AS/400e-server for single- and multi-user environments.
Model Abstract 9401-P03: (For IBM US, No Longer Available as of July 1, 1997)
The AS/400 Advanced Portable Model P03 has 8MB of memory, 1GB of direct access storage devices (DASD), and two communications lines. The P03 is expandable to 56MB of memory and 4GB of DASD. It is available in specially priced packages. Each package is complete with hardware and selected software required by a majority of users. Three twinaxial packages are available, one for entry and two for growth. Entry and growth packages are also available as LAN connected systems, either Token-Ring or Ethernet. In addition, a pre-defined package is available for use as a server. These packages are specially priced and enable easy ordering of the system. The AS/400 Advanced Portable handles Version 3 Release 2 of OS/400, Client Access/400 and Query/400. [continue]
[back to top]
| Full-function AS/400 system
Small, portable package
Preloaded software
Model Highlights 9401-P03:
Easy-to-order package offerings
Full OS/400 function
Up to 56MB memory and 4GB disk storage
A LAN connected PC may be used as a system console
Optional soft-sided or hard carrying cases
Token-Ring or Ethernet LAN packaged offerings
Version 3 Release 2 of OS/400, Client Access/400 and Query/400.
[continue]
[back to top]
| The IBM 9401 is an Application System/400 that consists of two versions, both for single- and multi-user environments. One is a Portable AS/400 version. The other is an AS/400 Advanced Entry version.
Model Description 9401-P03: The AS/400 Advanced Portable can be used for:
Development and testing of new applications, Training, Multi-user business applications, Remote, portable applications, such as kiosks, Application, data base or print server
The 840MB QIC Mini Tape Unit is a feature for the AS/400 Advanced Portable. It provides a lower priced alternative, and a convenient, smaller-sized tape cartridge than the traditional QIC devices.
The IBM 9401 Application System/400 Portable is an AS/400 system unit designed for the single- and multi-user environments. Its compact size and portability allow for easy transportation of the system between work and other locations. AS/400 software that currently operates on the 9402, 9404 and 9406 will run on the Portable system. This includes the more than 20,000 applications currently available for the AS/400 system, including client/server applications. Approximately the size and weight of a fully packed attache case, the AS/400 Portable comes with a carrying case that can hold the system and a notebook computer. The IBM ThinkPad and other notebook computers are supported. The hard-sided case, with the added benefit of wheels and a handle, may be checked as airline luggage. To meet the IBM protection standard for shipping, it is significantly larger than the soft-sided case. Any twinaxial device supported by the AS/400 system may also be used as a workstation. AS/400 Function in a Compact Package AS/400 Advanced Portable provides full OS/400 function in a compact package and is designed to meet the needs of customers who require a single or multi-user system that is easily transportable and can also run a wide range of AS/400 applications, including client/server applications.
AS/400 Advanced Portable can also be used for development and testing of new applications, as well as training and customer support activities consistent with supporting multiple, remote or distributed systems. It is an ideal solution when portability outweighs the need for growth.
The AS/400 Advanced Portable's lightweight and compact carrying case allows it to be easily transported by car or airplane, thereby saving shipping costs and eliminating possible delivery delays. AS/400 Advanced Portable is approximately the size and weight of a fully packed attache case. The optional soft sided carrying case can hold both the AS/400 Advanced Portable and a notebook computer. A hard sided carrying case, suitable for checking as luggage, is also available.
[continue]
[back to top]
| To simplify ordering, the AS/400 Advanced Portable is offered in pre-defined packages: Three twinaxial-based systems, three LAN based systems, and a server.
Each package is a complete system, including pre-loaded software required by a majority of users (OS/400, CA/400, and Query/400). The package prices do not include the price of the software.
AS/400 Advanced Portable Packaged Offerings Package Entry Growth Entry Growth Server
Name Twinaxial Twinaxial LAN LAN
------- ---- ------------ ------- ----------- ---
Package # T01 T02 T03 L01 L02 L03 S01
Proc (RPR) 2.5 3.3 3.9 2.5 3.3 3.9 1.9/5.9
Base Memory 8MB Maximum 24MB/40MB/56MB Base DASD 1.03GB/1.96GB Maximum 2.99GB/3.93GB Comm Lines 1-2 LAN -- -- -- 1 Addr/Users 7/14/16
Power Cord Specify: Will be provided based on country default. Notes: · The relative system performance ratios for the AS/400 Advanced Portable are estimated for AS/400 environment, native RAMP-C workload, with a 9404 Model B10 with 16MB of main storage and 945MB of DASD equaling 1.0. The ratios shown were estimated at maximum configurations running at 70% utilization. Relative system performance ratios may not be realized in all environments. The maximum system RPR shown above is limited to 3.9 due to the system supporting a maximum of two disk units. For a CPU-intensive workload where memory utilization and disk utilization are not constrained, the system could achieve an RPR of approximately 5.8.
LAN operates at 4Mbps. Connection of this device to a 16Mbps LAN requires the support of OS/400 V3R2 with RPQ S40378. On LAN and server packages one of the two communication lines must be used to provide system console support. The other line may be used for ECS or other SDLC communications. Capacities shown are for models shipped from the plant and include any prerequisite expansion features. Some combinations of devices may be subject to configuration restrictions. Optional Features: Main Storage (Memory) - 8 or 16MB increments on all packages (Note 1) DASD - 1.03 or 1.96GB increments on all packages (Note 2) Tape recommended but not included in packages, select one 840MB QIC Mini (internal) 840MB QIC Mini (external) 3450 QIC (1.2GB) external See Note 2
Hard or soft-sided carrying case Transition Data Link
Note 1: 16MB only, on the S01 package. Note 2: If more than base DASD is configured, then the required tape device must be either the external 840MB QIC Mini feature tape or the external 3450 QIC tape device. Two DASD devices and internal 840MB QIC Mini tape are mutually exclusive. Optional items may be added to the packages on the initial order or after installation.
[continue]
[back to top]
| · 3450 External QIC (1.2GB)
Battery backup is not part of the base unit and an Uninterruptible Power System (UPS) is recommended for production operations. Refer to the Device support section for more information.
Displays and printers as listed in Device Support section
| Memory DASD Workstation Comm. LAN Preloaded
Model Min/Max Min/Max Controller Port Conn. Software
----- -------- ------- ----------- ----- ----- -------------
P03 8MB-56MB 103GB-3.93GB 0-1 1-2 0-1 OS/400 V3R2, CA/400. Query/400 [continue]
[back to top]
TAPE DEVICES 3450 Model 001
The 3450 Model 001 is an external 1.2GB 1/4-inch tape drive which attaches to the AS/400 Advanced Portable via the base Multi-Function I/O processor and has an effective data rate of 300KB per second when operating using the QIC-1000 Data Cartridge media. It can be used for alternate IPL, save/restore, program interchange, and 1/4-inch cartridge tape interchange with other AS/400 systems. Full interchange of data is supported with all the standard and optional 1/4-inch cartridge tape units provided on the 9402, 9404 and 9406 system models. (The 3450 Model 001 is approved for operation in residential environments.)
To attach the AS/400 Advanced Portable to a 3450 Model 001 External 1/4-inch Cartridge Tape Drive, the following cable attachment feature is required:
Description Part Number Feature Number
--------------------------- ----------- --------------
1.2m System to Device Cable 21H0197 2856
Note: Cable features used with the 9401 Models P01 and P02 cannot be used with the AS/400 Advanced Portable.
7207 Model 012
Though the 7207 was supported on the 9401 Models P01 and P02, it is not recommended for use on the AS/400 Advanced Portable. Because this tape drive is an RS/6000 product, there is built-in microcode which OS/400 may erase when doing an IPL. In some instances, it may be impossible to again update the microcode for RS/6000 compatibility. If you have previously IPLed the 7207 on a 9401, and do not anticipate a need for transferring use between the 9401 and RS/6000, you may continue to utilize the 7207 on the AS/400 Advanced Portable.
To attach the AS/400 Advanced Portable to a 7207 Model 12, the following cable attachment feature is required:
Description Part Number Feature Number
--------------------------- ----------- --------------
1.2m System to Device Cable 21H0197 2856
Note: Cable features used with the 9401 Models P01 and P02 cannot be used with the AS/400 Advanced Portable models.
REMOTE WORKSTATION CONTROLLERS 5251 Model 12 - The 5251 Model 12 may be used to attach remote workstations. It is a workstation controller and communications unit for remote attachment of multiple display stations and printers. Client Access/400 access by Personal Computers and Personal System/2s attached to the 5251 Model 12 is not supported.
5394 Remote Control Unit - The 5394 Remote Control Unit attaches up to sixteen 5250 type displays, printers, IBM Personal Computers and Personal System/2s, and Personal System/55 (AP only) to an AS/400 via a communications link.
5494 Remote Control Unit - The 5494 Remote Control Unit manages the operation of workstations and workstation communications to the AS/400. The IBM 5494-EXT replaces the IBM 5494-001 and the IBM 5494-002. The 5494 now has only one model, to which features are added customizing the 5494 for operational needs.
- The 5494-EXT supports the attachment of up to 28 twinaxial devices. With the 5494 Twinaxial Expansion Kit installed, up to 56 twinaxial devices can communicate to the AS/400 through a Type 2.1 connection.
- By installing the 5494 Token-Ring Adapter, the 5494-EXT has all the functional capabilities of the withdrawn 5494-002. It can communicate with an AS/400 system over a Token-Ring network while supporting up to 28 twinaxial devices, or can support Token-Ring attached devices while communicating with an AS/400 over an SDLC, X.21, or X.25 connection. In this configuration, the 5494 supports up to 80 devices of which up to 28 could be twinaxial attached and the rest Token-Ring attached.
- The Ethernet Adapter supports IEEE 802.2 logical link control and IEEE 802.3 or DIX Version 2.0 frame format using a 10BASE2 (BNC), a 10BASE5 (15-pin D-SUB), or a 10BASE-T (RJ-45) connector. The 5494 Ethernet AUI Cable allows the attachment to an Ethernet Network using thick coaxial (10BASE5) cabling. Ethernet support allows the 5494 to be used as a gateway to an Ethernet LAN or attach to an AS/400 System via an Ethernet Network.
- The 5494 Utility Program allows the selection of Concurrent Diagnostics, configuration information, or to reset and restart the 5494 Remote Control Unit from a remote Programmable Workstation (PWS). The PWS no longer needs to be directly attached to a 5494 to provide access to remote 5494s from a central site.
- The IBM 5494 Release 3.0 microcode supports all the functions of the IBM 5494 Release 2.0 microcode and the following enhancements:
Support of OS/400 Version 3 Release 2 Support for AS/400 automatic configuration of Non-programmable Workstations (NWS) and printers attached to the 5494. The 5494 Remote Control Unit description can also be automatically created. (This function requires OS/400 V3R2 be installed on the AS/400)
Attachment capability to a SNA subarea network. MULTICONNECTORS 5299 Multiconnector and TTPA Adapter
The 5299 Multiconnector and Twinaxial to Telephone Twisted Pair Adapter (TTPA) may be used with appropriate telephone wiring. WORKSTATION SUPPORT Twinaxial Displays
The following displays are supported by the Twinaxial Workstation Controller (#9172, and #9178):
3179 - 2, 3180 - 2, 3196, 3197, 3476, 3477, 3486, 3487, 3488, 3489, 5251 - 011, 999, 5291, 5292 - 1, 2, 6250 X Terminal Family
The IBM 6250 X Terminal offers high-performance, local-area network (LAN)-attached X terminals that provide a low-cost, desk-top platform for connectivity to the AS/400* and UNIX based host platforms (such as the RS/6000*). The 6250 X Terminal supports multiple 5250 emulation sessions to one or more AS/400s using an X Windows interface. The X terminal can also access UNIX host applications using either the memory efficient 6250 Window manger or the industry standard Motif** Window Manager. Either window manager provides a superb graphics platform for applications in the X Window environment.
The 6250 X Terminal Family includes four models...color and monochrome Ethernet models and color and monochrome Token-Ring models. They come with a base of 4MB of memory, expandable to 20MB or 16MB, depending on the model. The displays both have a resolution of 1024X768 and the color models support 256 colors.
The 6250 X Terminal requires one AS/400 on the LAN to have the IBM 6250 X Terminal Program for OS/400 (PRPQ 5799-QGP) installed. The X terminal down-loads the X window environment from the AS/400 and then can communicate with other hosts on the LAN.
The X terminals include an integrated, swivel display, keyboard, three button mouse and license to use the 6250 program. The X terminals have an easy to use setup menu for initial configuration and standard LAN connectors for the most popular Ethernet or Token-Ring connections. Personal System/2 Support The AS/400 supports the IBM Personal System/2 models and the IBM Personal Typing System. For information regarding attachment of specific Personal System/2 models refer to the model Sales Manual description under "List of Supported Products" for AS/400 attachment hardware and under "IBM Software Compatibility" for supported AS/400 software.
| | PRINTER SUPPORT Twinaxial Printers
The following printers are supported by the Twinaxial Workstation Controller. Those which are DBCS (Double Byte Character Set) font capable are listed in the subsequent section.
Laser Printers Includes all electrophotographic print technologies.
Twinaxial Attached:
3930 - 02S, 02D (DBCS option required)
IBM Personal Printers The following IBM Personal Printers are supported by the attachments indicated in the following table. Refer to "Attaching IBM Personal Printers to IBM Systems" (S544-4209) for attachment information. Also refer to the specific emulator product documentation for attachment information.
Device Attachment
Printer Type Model Keys
------- ------ ----- -------------------
IBM Personal Series II/Plus 23xx
IBM 38x Pageprinter
IBM 39x Pageprinter
IBM LaserPrinter 40x
IBM Proprinter 42x
IBM 42x Printer
IBM 4770 Ink Jet Printer 4770
IBM Quietwriter 52x
IBM Impactwriter 62x
IBM 6400 Printer 64x Non-IBM Personal Printers
Many Non-IBM Personal Printers are also supported. Refer to "Attaching IBM Personal Printers to IBM Systems" (S544-4209) for attachment information. Also refer to the specific emulator product documentation for attachment information.
Attachment Keys: 1. Attachment via the AS/400 ASCII Workstation Controller
2. Attachment via a PC or PS/2 utilizing AS/400 PC Support Workstation Function (DOS)
3. Attachment via a PC or PS/2 utilizing IBM OS/2 Extended Edition Version 1.3, or later
4. Attachment via the 3477 InfoWindow display or 3486/3487/3488 InfoWindow II displays
5. Attachment via the 3197 Display station
6. Attachment via a PS/2 utilizing the S36/38 Workstation Emulation Program
7. Attachment via a PC or PS/2 utilizing the Enhanced 5250 Emulation Program
8. Attachment via a PC or PS/2 utilizing the Remote 5250 Emulation Program
9. Attachment via the 5208 Model 1 ASCII-5250 Link Protocol Converter
10. Attachment via Rumba/400
11. Attachment via IBM OS/2 Communications Manager/2
12. Attachment via OS/400 Host Print Transform function
LAN-attached ASCII Printers
IBM and non-IBM ASCII printers can be attached directly to the AS/400 via a LAN connection using the IBM 4033 LAN connection product. Ethernet and Token-Ring connections are supported. The ASCII printers that are supported through this attachment method are the same printers supported using the OS/400 Host Print Transform function. Refer to the previous charts for a list of IBM and non-IBM ASCII printers supported with the Host Print Transform function.
The IBM 4039 LaserPrinter can also be attached directly to the AS/400 via a LAN network connection using the 4039 integrated network adapter option.
LAN-attached IPDS Printers
The following Advanced Function Print (AFP) capable IBM Page Printers are supported on Token-Ring and SDLC as specified. The Print Services Facility/400 (PSF/400) feature of OS/400 Version 3 Release 2 is required for the attachment of these printers.
Device
Type Model Speed Attachment
------ ----- ----- ----------
3935 1 35PPM Token-Ring, SDLC
The following IBM Page Printers are supported on Token-Ring (using Remote Print Manager or PSF/2 Version 1.10 or later) and SDLC as specified:
Device
Type Model Speed Attachment
------ ----- ----- ----------
3820 1* 20PPM Token-Ring, SDLC
3825 1 58PPM Token-Ring
3827 1 92PPM Token-Ring
3828 1 92PPM Token-Ring
3829 1 91PPM Token-Ring
3835 1 88PPM Token-Ring
3835 2 91PPM Token-Ring
3900 1 229PPM Token-Ring
3900 DUP 300PPM Token-Ring
* Withdrawn from marketing
Ordering Information
MISCELLANEOUS DEVICES 5259 Migration Data Link
The 5259 Migration Data Link is a stand-alone device that offers a cabled data path between the IBM System/36 or System/38 and the IBM AS/400 system. Systems are connected through their respective workstation controllers.
The Migration Data Link, together with programming support provided by the IBM AS/400 System/36 Migration Aid (5727-MG1) or the IBM AS/400 System/38 Migration Aid (5714-MG1) and the IBM Operating System/400 Version 3 Release 0.5 or later, provides for data send/receive functions between systems. In addition, the Migration Data Link provides access between systems by providing hot key availability from up to seven workstations per Migration Data Link.
8228 Multi-Station Access Unit
The 8228 Multi-Station Access Unit or equivalent may be required to attach the AS/400 Advanced Portable to your token-ring network. The IBM 8228 is a compact device which can be mounted in a standard 19-inch wiring closet rack, or placed wherever you have space. It provides for attachment of up to eight devices to your LAN, and can be used in multiples to accommodate all your devices. The IBM 8228 is designed for smaller token-ring LANs and does not support network management programs and alerts.
9910 Uninterruptible Power Systems
9910 Uninterruptible Power Systems: An Uninterruptible Power System (UPS) significantly improves system uptime by minimizing the impact from power fluctuations and outages. The UPS will protect both the hardware and software assets and provide power for a limited period of time, when required. If the power outage continues, the UPS notifies the AS/400 to start a controlled shutdown that helps save the customer's data. The AS/400 Advanced Portable does not contain an internal Battery Backup Unit (BBU) and therefore an external UPS is recommended. The UPS has roughly the equivalent cost of a BBU while providing additional function.
The UPSs offered are manufactured by Best Power Technology, Inc. and Exide Electronics, Inc. and offer a two- or five-year warranty (UPS and battery), dependent on the model and manufacturer.
The following UPSs are available with the AS/400 Advanced Portable:
Refer to the country table in announcement letter 195-016, dated 02/07/95. For additional information on the UPSs contained in the country table refer to announcement letter 194-112, dated 05/03/94, for models 9910-B08 and 9910-B09 and announcement letter 194-315, dated 10/04/94, for model 9910-B22.
External Devices Not Supported by the AS/400 Advanced Portable 1255 MICR, 3203 Printer, 3262 Printer, 3370 DASD, 3410/3411 Tape Units, 4245 - 012, 020 (Note 1), 5211 Printer, 5224-012 Printer (Japan only), 5225-011, 012 Printer (Japan only), 5251-001, 002 Display, 5251-012 Display/WS Controller (AS/400 Office and PC support only), 5252 Display, 5255 Display (Japan only), 5424 MFCU, 6157 Cartridge Tape Unit, 62PC Disk Drive, 6580 Displaywriter as a printer device, 6670 Document Processor, 8809 Tape Drive, Digital Data Service Adapter (DDSA) Diskette Magazine Unit
Initial 5250 Emulation Adapter for IBM Personal Computer (6072534)
Note 1: RPQs are available to convert models 012 and 020 to models T12 and T20 which are supported by 9402.
Model Conversions
AS/400 Advanced Portable is not upgradable to any other model of the AS/400. The 9401 Models P01 and P02 are not upgradable to the new AS/400 Advanced Portable.
| Technical Description
Physical Specifications
Weight: 10 Kg (22 lbs) (Maximum configuration)
Height: 32 cm (13 inches)
Depth: 40 cm (16 inches)
Width: 10.5 cm (4 inches) (Excluding pedestal)
Width: 16.5 cm (6.5 inches) (Including pedestal)
Operating Environment
· Temperature: 10 to 38 degrees C (50 to 100 degrees F)
Relative Humidity: 8 to 80 (percent)
The IBM 3450 Model 001 tape drive and the new QIC Mini Tape cartridge have a relative humidity range of 20 to 80 percent.
Max Wet Bulb: 23 degrees C (73.4 degrees F)
Acoustics: AS/400 Advanced Portable system units are acoustically designed for use in "quiet office" areas such as private offices, libraries, classrooms, and conference and meeting rooms.
Voltage: The 9401 Unit can operate at either of two nominal voltage ranges: 100-127 VAC or 200-240 VAC. The appropriate system power cord will automatically be supplied based on the three-digit country code.
The AS/400 Advanced Portable should always be used with a grounded AC outlet. It is the customer's responsibility to ensure a properly grounded outlet is available.
The operation and reliability of this product can be adversely affected by exposure to extreme temperature conditions, such as those that might develop within an automobile.
The following table can be used for acclimation times if the system has been in a hot environment, in the soft-sided case, for an extended period of time.
| Acclimation Time
Temperature | (in soft-sided case)
--------------------
104 F | 0.25 hrs
(40 C) |
--------------------
122 F | 1.5 hrs
(50 C) |
--------------------
140 F | 2.5 hrs
(60 C) |
"Temperature" is the temperature which the machine is allowed to heat up to. "Acclimation Time" is the time required for the system to reach a point below the allowable maximum operating temperature. Since condensation is not a concern, when bringing a hot system into a cooler environment, the carrying case should be removed.
In addition, if the machine is moved between places with very different temperature and humidity levels, condensation can build up and damage the equipment. When traveling, allow sufficient time for the equipment to adjust to environmental changes before unpacking or connecting AC power.
The approximate acclimation times for a cold AS/400 Advanced Portable in the carrying case are:
| Acclimation Time
Temperature | (in soft-sided case)
--------------------
10 C | 0 hrs
(50 F) |
--------------------
0 C | 2.5 hrs
(32 F) |
--------------------
-10 C | 3.5 hrs
(14 F) |
--------------------
-30 C | 5.5 hrs
(-22 F) |
--------------------
"Temperature" is the temperature that the machine is allowed to cool down to prior to bringing it indoors. "Acclimation Time" is the time required for the machine's temperature to rise above the room dew point temperature in a room at 68 degrees-F and 40-45% relative humidity. (The machine will not actually be at room temperature, but will be warm enough that condensation will not occur.) The machine should be left in the carrying case during this time.
For rooms with higher then 68 degrees F, Dew Point temperatures, a combination of temperature and relative humidity that yields higher levels of airborne moisture, the acclimation times will need to increase.
Failure to permit sufficient time for the AS/400 Advanced Portable to acclimate itself, per the previous tables, constitutes system misuse and will void the warranty.
Limitations
AS/400 Advanced Portable not upgradable to any other AS/400 model, nor are the 9401 P01 or the P02 upgradable to the AS/400 Advanced Portable.
Please note that though the 7207-012 was supported on the 9401 Models P01 and P02, it is not recommended on the AS/400 Advanced Portable (see text in feature support section).
This product must be in a vertical position to operate properly.
Hardware Requirements
To maintain the system unit, a system configuration in needed which consists of the AS/400 Advanced Portable system unit and a system console. The system console may include any supported display, IBM Personal Computer, or notebook computer.
Note: The PCMCIA adapter (P/N 92G5360) is not included.
In order to support the system console requirement for purposes of service on portable or personal computers, a terminal emulator program is required, (for example, DP5250). Client Access/400 does not provide this function. The console should be located within six meters (20 feet) of the system control panel, which must be readable from the console. Although required, the system console is not a component of the base system unit.
A printer is not required for service, however, IBM's ability to diagnose the system is greatly enhanced when a printer is available.
This Product requires an IBM 3450 Model 001 or QIC Mini Tape Unit for removable media functions and when an alternate IPL device is required.
Software Requirements
AS/400 Advanced Portable is designed to operate with OS/400 Version 3 Release 2.
| The following publications are supplied with AS/400 Advanced Portable Models:
AS/400 Problem Analysis (SY44-3961)
AS/400 Repair and Parts (SY44-3962)
AS/400 Safety Inspection (SY44-3963)
AS/400 9401 Installation - Models P03 and 10S (SA41-3141)
OS/400 Version 3 Release 2
With OS/400 Version 3 Release 2, softcopy publications are shipped on machine readable tape media. These softcopy manuals can be displayed, read and searched using the new InfoSeeker program that is shipped at no charge with OS/400 Version 3 Release 2. They can also be read with the Library Readers or the Book Manager Read family of licensed programs.
The following publications are available in hardcopy and will be supplied automatically with OS/400:
Title Order Number
----------------------------------- ------------
Publications Ordering SC41-3000
InfoSeeker -- Getting Started SC41-3001
Software Installation SC41-3120
Local Device Configuration SC41-3121
Getting Started with AS/400 SC41-3204
System Startup and Problem Handling SC41-3206
Backup and Recovery -- Basic SC41-3304
Software Installation -- Automatic SX41-3128
Client Access/400
A basic set of hardcopy manuals is available for each Client Access/400 product (DOS, Windows, OS/2).
The following base set of hardcopy manuals and softcopy publication features are orderable with the initial order. The default for the publication features is to not ship any publications. You must select each feature you plan to use.
Client Access/400 Hardcopy Publications (Choose 1 feature at no-charge):
Feature
Title Number*
---------------------------------------------- -------
Client Access/400 for DOS with Extended Memory 7573
Client Access/400 for OS/2 7574
Client Access/400 for DOS 7575
Client Access/400 for Windows 3.1 7576
Client Access/400 Optimized for OS/2 7583
*Note: See below for detail of publications included in each feature.
Detail of Publications Included:
DOS with Extended Memory -- Publications Feature 7573:
------------------------------------------------------
Client Access/400 Setup for DOS
with Extended Memory SC41-3500
Client Access/400 User's Guide for DOS
with Extended Memory SC41-3501
Client Access/400 Setup for DOS
with Extended Memory (DBCS) SC41-3502
Client Access/400 User's Guide for DOS
with Extended Memory (DBCS) SC41-3503
Client Access/400 Getting Started for DOS
with Extended Memory SC41-3504
Client Access/400
Quick Installation for DOS SX41-3505
OS/2 -- Publications Feature 7574:
----------------------------------
Client Access/400 Setup for OS/2 SC41-3520
Client Access/400 User's Guide for OS/2 SC41-3521
Client Access/400 Setup for OS/2 (DBCS) SC41-3522
Client Access/400 User's Guide
for OS/2 (DBCS) SC41-3523
DOS -- Publications Feature 7575:
---------------------------------
Client Access/400 Setup for DOS SC41-3556
Client Access/400 User's Guide for DOS SC41-3557
Client Access/400 Setup for DOS (DBCS) SC41-3558
Client Access/400 User's Guide
for DOS (DBCS) SC41-3559
Windows 3.1 -- Publications Feature 7576:
-----------------------------------------
Client Access/400 Getting Started
for Windows 3.1 SC41-3530
Client Access/400 Setup
for Windows 3.1 PC 5250 SC41-3552
OPTIMIZED FOR OS/2 -- PUBLICATIONS FEATURE 7583:
------------------------------------------------
Client Access/400 Optimized for OS/2 Getting Started SC41-3510
Client Access/400 Optimized for OS/2 PC 5250 Setup SC41-3555
Client Access/400 Publications Available for Purchase:
------------------------------------------------------
Client Access/400 API Reference
for DOS, OS/2 SC41-3562
Client Access/400 Technical Reference
for DOS, OS/2 SC41-3563
Client Access/400 RUMBA/400 Tools SC41-3551
Client Access/400 API Reference
for Windows 3.1 SC41-3531
Client Access/400 PC 5250 Reference Guide SC41-3553
Client Access/400 PC 5250
Programmer's Guide SC41-3554
Ultimedia Facilities Installation
and Administration SC41-3540
Ultimedia System Facilities User's Guide SC41-3541
Ultimedia System Facilities Programming SC41-3652
Graphical Operations Setup SC41-3122
Graphical Operations Getting Started SC41-3202
Other hardcopy publications are available for a fee. They can be ordered from your IBM representative. Publications are subject to change.
For a current list of publications, refer to the appropriate publications option on your respective HONE system, or contact your local IBM representative.
| Features -- Specify/Special/Exchange
No Charge Specify Codes
Default Specify Features
Except Africa/Middle East, the country standard Voltage, Nomenclature/Language will automatically be supplied based on the country code of the order. The Specify codes included above and in the Sales Manual are only to be ordered when an alternative to the country default is required.
The default ordering approach is being used for power and language specify items depending on the country origin of the order. If a language option different from that shown for your country is desired, it must be specified from the listings below. If a power cord other than the 120-Volt default is desired, it must be specified.
Language Sensitive No Charge Specify Codes
One of the following specify codes may be used to obtain a language grouping other than the default (see table below for defaults).
Language Sensitive Documentation and Panel Overlays
Specify
Code Language Abbreviation
------- --------- ------------
#2924 English ENG
#2928 French FRN
#2929 German GER
#2931 Spanish SPA
#2932 Italian ITA
#2935 Canadian/French CFR
#2941 Arabic
#2982 Finnish FIN
#2978 Portuguese POR
#2983 Norwegian NOR
#2984 Belgian/French
#2987 Swedish SWE
#2988 Dutch DUT
#2989 Belgian/Dutch
#2990 Hebrew
#2992 Italian
#2993 Danish DAN
#2996 French
#2997 German
Power/voltage Range and Specify Codes
The 9401 System Unit can operate at either low voltage (100-127VAC) or high voltage (200-240 VAC). The appropriate system power cord will automatically be supplied based on the three-digit country code. If other than the default option is required, specify:
#2960 120-Volt Power Cord (Worldwide Default)
#2961 240-Volt Power Cord
No specify code is required for system power cables. The appropriate power cord will automatically be supplied based on the three digit country code. If other than the default option is required, specify:
#2960 for 120-Volt Power Cord, or #2961 for 240-Volt Power Cord.
Special Feature Codes -- Chargeable
Main Storage Features
8MB Main Storage #3117: This feature provides an additional 8MB of memory. It consists of two 4MB modules that plug into the base processor card on P03 models only.
16MB Main Storage #3118: This feature provides an additional 16MB of memory. It consists of two 8MB modules that plug into the base processor card on P03 models only.
8MB Main Storage #3159: This feature provides 8MB of feature main storage. It is used only with package features #0108, #0109, #0111, #0112, #0113, and #0118.
16MB Main Storage #3160: This feature provides 16MB of feature main storage. It is used only with package features #0108, #0109, #0111, #0112, #0113, and #0118.
Main Storage Capacity
#3117 #3118 #3159 #3160 Total Maximum
Model Base 8MB 16MB 8MB 16MB Feats Main Storage
----- ---- ----- ----- ----- ----- ----- ------------
P03 T01 8MB 1 1 1 24MB
P03 L01 8MB 1 1 1 24MB
P03 T02 8MB 2 2 2 40MB
P03 L02 8MB 2 2 2 40MB
P03 T03 8MB 2 3 3(1) 56MB
P03 L03 8MB 2 3 3(1) 56MB
(1) Three features are supported only if at least two of the features are #3160s.
Packages and Performance Enhancement Features
T01 Performance Enhancement (#0106): This feature includes the following:
3.3 RPR Processor w/8MB on card Main Storage
FULIC tape (default media 1/4", QIC-Mini if 9504 specified)
EIA 232/V.24 Two-Line Adapter This includes an adapter and a 10ft two connector stub cable used to attach two communication lines of async, BSC, SDLC or X.25 protocol, one of which may be an ECS line.
EIA 232/V.24 20ft enhanced cable
Number of twinaxial workstations increased from 7 to 14
The 2.5 RPR processor and EIA 232/V.24 One-Line Adapter currently on the system must be returned to IBM.
Prerequisite FC #0101. Mutually exclusive with #0110.
L01 Performance Enhancement (#0107): This feature includes the following:
3.3 RPR Processor w/8MB on card Main Storage
FULIC tape (default media 1/4", QIC-Mini if 9504 specified)
The 2.5 RPR processor currently on the system must be returned to IBM.
Prerequisite FC #0103. Mutually exclusive with #0112.
9401 T03 Package (#108):
System Unit (including 6-foot universal line cord, three memory feature positions, and two internal DASD/tape positions) (GS Mark-compliant covers in Germany)
Processor with 8MB of main storage on the processor card.
MFIOP and Integrated Workstation Controller (Support for: Service Processor, integrated DASD, internal or external tape, twinaxial workstation controller with two ports and support for two communication lines)
1.96GB Disk Unit
EIA 232/V.24 Two-Line Adapter including a 10-foot two-connector stub cable used to attach two communication lines of async, BSC, SDLC, or X.25 protocol, one of which may be an ECS line.
Two EIA 232/V.24 20-foot enhanced cables
Specify one of the following alternate IPL media:
#5502 Alternate IPL Specify for QIC-3040
#5516 Alternate IPL Specify for QIC-1000 (For IBM US, No Longer Available as of August 31, 1998)
Preloaded software in National Language Version (NLV) where appropriate:
OS/400 V3R2
Client Access/400 (Except in Canada)
Query (Except in Canada)
9401 L03 Package (#0109): (For IBM US, No Longer Available as of July 1, 1997)
System Unit (including 6-foot universal line cord, three memory feature positions, and two internal DASD/tape positions) (GS Mark-Compliant Covers in Germany)
Processor with 8MB of main storage on the processor card.
MFIOP and Integrated LAN Controller (Support for: Service Processor, integrated DASD, internal or external tape, LAN and support for one communication line)
Specify one of the following LAN adapters:
#9174 - Ethernet IOA (For IBM US, No Longer Available as of July 1, 1997)
#9175 - Token-Ring IOA (For IBM US, No Longer Available as of July 1, 1997)
1.96GB Disk Unit
EIA 232/V.24 Two-Line Adapter
This includes an adapter and a 10-foot two-connector stub cable used to attach one ECS communication line using SDLC-only protocol and a second line for the client access console.
EIA 232/V.24 20-foot enhanced cable
EIA 232/V.24 6-m client access console cable
Specify one of the following alternate IPL media:
#5502 Alternate IPL Specify for QIC-3040
#5516 Alternate IPL Specify for QIC-1000 (For IBM US, No Longer Available as of August 31, 1998)
Preloaded software in National Language Version (NLV) where appropriate
OS/400 V3R2
Client Access/400 (Except in Canada)
Query (Except in Canada)
T01 Performance Enhancement II (#0111):
Processor with 8MB of main storage on the processor card.
Existing memory features are incompatible with the new processor. New memory features (#3159 and #3160) must be purchased for use with package feature #0111.
FULIC tape (default media 1/4-inch, QIC-Mini if 9504 specified)
The number of twinaxial workstations supported increases from 7 to 14.
EIA 232/V.24 Two-Line Adapter that includes the adapter and a 10-foot two connector stub cable used to attach two communication lines of async, BSC, SDLC or X.25 protocol, one of which may be an ECS line.
EIA 232/V.24 20-foot enhanced cable
The processor and EIA 232/V.24 One-Line Adapter currently on the system must be returned to IBM. Prerequisites: #0101 or #0144. Mutually exclusive with #0106. Requires OS/400 V3R2 with PTFs.
L01 Performance Enhancement II (#0112):
Processor with 8MB of main storage on the processor card.
Existing memory features are incompatible with the new processor. New memory features (#3159 and #3160) must be purchased for use with package feature #0112.
FULIC tape (default media 1/4-inch, QIC-Mini if 9504 specified)
The processor currently on the system must be returned to IBM. Prerequisite #0103. Mutually exclusive with #0107. Requires OS/400 V3R2 with PTFs.
T02 Performance Enhancement (#0113):
Processor with 8MB of main storage on the processor card.
Existing memory features are incompatible with the new processor. New memory features (#3159 and #3160) must be purchased for use with package feature #0113.
FULIC tape (default media 1/4-inch, QIC-Mini if 9504 specified)
The processor and FULIC tape currently on the system must be returned to IBM. One of the following features is required:
#0102 (For IBM US, No Longer Available as of July 1, 1997)
#0124 (For IBM US, No Longer Available as of July 1, 1997)
#0101 with #0106 (For IBM US, No Longer Available as of July 1, 1997)
#0144 with #0106 (For IBM US, No Longer Available as of July 1, 1997)
;p.Requires OS/400 V3R2 with PTFs.
L02 Performance Enhancement (#0118):
Processor with 8MB of main storage on the processor card.
Existing memory features are incompatible with the new processor. New memory features (#3159 and #3160) must be purchased for use with package feature #0118.
FULIC tape (default media 1/4-inch, QIC-Mini if 9504 specified)
The processor and MULIC tape currently on the system must be returned to IBM. One of the following features is required:
#0104 (For IBM US, No Longer Available as of July 1, 1997)
#0103 with #0107 (For IBM US, No Longer Available as of July 1, 1997)
Requires OS/400 V3R2 with PTFs.
Disk Features
Single Disk Unit (1.96GB) (#6606): Additional 1.96GB Disk Unit.
Single Disk Unit (1.03GB) (#6652): (For IBM US, No Longer Available as of July 31, 1996)
Additional 1.03GB Disk Unit.
Tape Features
6335 External Conversion Kit (#1335): This conversion kit allows an internal 840MB QIC Mini tape drive (#6335) to be converted to be attached externally. When installed the converted tape looks like the (#6365) external 840MB QIC Mini tape.
Maximum: One.
840MB QIC Mini Tape Unit (#6335/6365): The 840MB QIC Mini Tape Unit is a feature for the AS/400 Advanced Portable. It provides a lower priced alternative, and a convenient, smaller-sized tape cartridge than the traditional QIC devices. It can be used for save/restore, alternate IPL, software distribution, migration and data interchange. Using the QIC-3040-MC recording format, tape cartridge capacity is 840MB. With hardware data compression, maximum tape cartridge capacity is up to 1.6GB. Sustained data transfer rate is 300KBps.
The 840MB QIC Mini Tape Unit may be internally installed (#6335), or externally with feature (#6365) via a SCSI cable. Attachment of a maximum of one tape unit is allowed. OS/400 V3R2 is required.
If integrated tape option is chosen, one DASD slot is used thereby limiting the maximum DASD capacity to 1.96GB.
Maximum: One.
Miscellaneous Features
Transition Data Link (#0059): (For IBM US, No Longer Available as of June 30, 2000)
The IBM Transition Data Link (TDL) feature offers a twinaxial cable data path between IBM twinaxial systems, enabling easy migration of data from one system to another. The systems (an AS/400 and either an Advanced System 36, an IBM System/38 or any other AS/400 with a twinaxial workstation controller) are connected via their respective local twinaxial workstation controllers. Licence Programs 5727-MG1 for S/36 and 5714-MG1 for S/38 are required to drive the TDL. Software for AS/400 to AS/400 Data Transfer is automatically shipped as part of OS/400. The TDL provides for data send/receive functions between systems. Data is transferred at the system workstation controller data interchange speed.
Because this device requires a twinaxial workstation controller, it is available with the T01 and T02 packages only.
Maximum: One.
Carrying Case - Soft Cover (#0061): This feature is a soft cover carrying case for use when hand carrying a 9401.
Carrying Case - Hard Cover (#0062): This feature is a hard cover carrying case for use when hand carrying a 9401. It provides more protection than FC #0061 and should be used when checking the 9401 as luggage.
T01 Performance Enhancement (#0106): This feature includes the following:
3.3 RPR Processor w/8MB on card Main Storage
MULIC tape (default media 1/4", QIC-Mini if 9504 specified)
EIA 232/V.24 Two-Line Adapter This includes an adapter and a 10ft two connector stub cable used to attach two communication lines of async, BSC, SDLC or X.25 protocol, one of which may be an ECS line.
EIA 232/V.24 20ft enhanced cable
The 2.5 RPR processor and EIA 232/V.24 One-Line Adapter currently on the system must be returned to IBM.
Prerequisite FC #0101.
L01 Performance Enhancement (#0107): This feature includes the following:
3.3 RPR Processor w/8MB on card Main Storage
MULIC tape (default media 1/4", QIC-Mini if 9504 specified)
The 2.5 RPR processor currently on the system must be returned to IBM.
Prerequisite FC #0103.
| Carrying Case - Soft Cover (P/N 21H2014)
Carrying Case - Hard Cover (P/N 21H2015)
Customer Replacement Parts
None. [continue]
[back to top]
| Tape Cartridges:
· The 525MB 1/4-Inch Cartridge Tape Unit uses the IBM 6525 Data Cartridge (525MB), part number 21F8587 or equivalent and the IBM 6150 Data Cartridge.
The 840MB QIC Mini Tape Unit uses the IBM MC3000XL Data Cartridge (840MB), part number 16G8592 (US and Canada) and part number 16G8594 (Non-US and Canada) or equivalent.
The 1.2GB 1/4-Inch Cartridge Tape Unit uses the IBM 1.2GB Data Cartridge (1.2GB), part number 21F8732 or equivalent and the IBM 6150 and IBM 6525 Data Cartridges. The 1.2GB Data Cartridge is not readable in the 120MB or 525MB drives.
Cleaning Cartridges and Kits:
· The 1/4-Inch Cartridge Tape Units use the IBM .25-Inch Cleaning Cartridge Kit, part number 21F8570 or equivalent.
The 840MB QIC Mini Tape Unit uses the IBM QIC Mini Cleaning Cartridge, part number 16G8576 (US and Canada), part number 16G8585 (Non-US and Canada) or equivalent.
Diskettes: None.
[continue]
[back to top]
| Trademarks: (R), (TM), * Trademark or registered trademark of International Business Machines Corporation.
** Company, product, or service name may be a trademark or service mark of others.
Windows is a trademark of Microsoft Corporation.
UNIX is a registered trademark in the United States and other countries licensed exclusively through X/Open Company Limited.
[back to top]
|
|
